Skip to content

Discover the latest updates from B2S,
where we confront challenges
and pursue growth every day.

notice
B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 1
B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 2
B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 3

B2S exhibited its All-in-1 machine vision hardware solutions at Automation World 2025, held at COEX in Samseong-dong, Seoul, from March 12 to 14.

Photo credits: AW 2025.

First held in 1990 and now in its 35th edition, AW 2025 is Korea's largest industrial automation exhibition. Around 400 companies operated over 2,200 booths, attracting more than 80,000 visitors. AI, big data, smart factories, cloud computing, robots, and machine vision were among the featured technologies.

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 4
B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 5
B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 6

B2S presented CIS inspection solutions, SWIR and UV inspection systems, 3D inspection, and AI-based inspection solutions.

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 7

Large-area CIS inspection

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 8

A system combining a VIENEX 700 mm CIS with an Euresys CXP-6 board provided precise inspection of large targets. Image merging combines multiple captures into one image for intuitive results while maintaining precision across wide inspection areas.

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 9

VIENEX CIS supports a long working distance of up to 50 mm, enabling coaxial, flat-dome, and bar lighting. HDR and multi-exposure effects can be achieved without a two-shutter function, improving inspection flexibility.

UV inspection

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 10

The Vieworks BSI UV TDI camera uses a BSI sensor with up to over eight times the UV sensitivity of conventional TDI cameras. It is suited to low-light, high-speed, high-magnification UV inspection, including banknotes, wafers, and display panels.

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 11

3D inspection

The Vieworks VC-21MX2 camera, with 21 MP resolution and speeds up to 229 FPS, was combined with the Euresys Coaxlink Quad CXP-12 3D-LLE board and its onboard laser-line extraction. This enables 3D inspection without a dedicated integrated 3D sensor, allowing flexible configurations and simultaneous high-speed inspection and 3D imaging.

SWIR inspection

Vieworks and ARTRAY SWIR cameras cover 900–1700 nm to inspect fine defects in semiconductors, batteries, and PCBs that cannot be seen with the naked eye.

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 12

Japan's ARTRAY has over 35 years of experience in cameras for special wavelength bands. Its SWIR portfolio spans 16,000 pixels to 5 MP and includes high-speed cameras with USB 3.0 and Camera Link interfaces, supporting transmission inspection.

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 13

AI inspection: LISA and DAISY

LISA makes it easy to develop and deploy AI models using industrial data. The newly introduced DAISY includes LISA's capabilities and adds continuous model operation and management, including data preprocessing, auto-labeling, performance monitoring, retraining, and concurrent labeling for efficient data management.

ETIO and Tagger

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 14

The ETIO Series combines an encoder distributor, trigger generator, and I/O board in one signal-control solution. It selects two encoder inputs and converts them into four or eight signals with different periods, providing flexible signal processing.

B2S Showcases All-in-1 Machine Vision Hardware Solutions at AW 2025 — image 15

Tagger combines a Camera Link repeater and ETIO. It records actual encoder positions on every captured line to ensure image position accuracy, improve inspection reliability, and maintain consistent quality in high-speed line scan systems.

CEO Min-kyung Jo said it was meaningful to introduce B2S's hardware solutions to a broad range of industry professionals and reaffirmed the company's commitment to technical innovation and customized vision inspection solutions.

Following its participation the previous year, B2S returned with upgraded technologies supporting inspection and automation in semiconductor, battery, display, and PCB manufacturing. We will continue developing machine vision technologies and customer-specific inspection solutions.

SITEMAP